Definition
HOLD FOR RELEASE
Used by ATC to delay an aircraft for traffic management reasons; i.e., weather, traffic volume, etc. Hold for release instructions (including departure delay information) are used to inform a pilot or a controller (either directly or through an authorized relay) that an IFR departure clearance is not valid until a release time or additional instructions have been received.
- See: ICAO term HOLDING POINT
Source: FAA Pilot/Controller Glossary (verbatim from the Federal Aviation Regulations).
Where This Term Is Used
- 14 CFR § 91.1057 — § 91.1057 Flight, duty and rest time requirements: All crewmembers.
- 14 CFR § 91.1027 — § 91.1027 Recordkeeping.
2 sections reference this term in their FAR Decoded content.